Meaning

(Action)

LED 

(Color)

Signal

(Type)

Additional 

Information

Initialization

▬       ▬    ▬    ▬       ▬    ▬

Flashing

(Fast)

LED flashes after turning on the Device.

Confirms initialization process and system check-up completion.

Ready

▬ ▬ ▬ 

Sequence, one time

LED flashes after successful initialization of the Device.

Confirms that your Tedee Lock is ready to use.

Unlocking

 

▬▬▬▬▬▬▬▬▬▬▬

Constant

Green LED is turned on during the unlocking phase. 

Locking

 

▬▬▬▬▬▬▬▬▬▬▬

Constant

Red LED turned on during the locking phase. 

Pull Spring

 

▬▬▬▬▬▬▬▬▬▬▬

Constant

Green LED is turned on during the Pull Spring operation. 

Jammed

 

 

 

▬     ▬  ▬  ▬  ▬

5 flashes

 

LED flashes when Tedee Lock is jammed and needs attention.

Please check if your Device is calibrated correctly – if the problem reoccurs, contact Tedee Support Team.

Device

Shutdown

 

 

▬ ▬ ▬

"Breathing light"

LED flashes after 5 seconds of pressing the Button and keeps "breathing" until the device is shut down.

Confirms device shutdown process.

Factory Reset - Button pressed

 

 

▬ ▬ ▬

"Breathing light"

 

 

Factory Reset - After 5 seconds of button press

 

 

▬ ▬ ▬

3 flashes

 

Low Battery

 

▬ ▬ ▬       ▬ ▬ ▬    

▬ ▬ ▬

3 flashes x 3 times

LED flashes when battery level reaches 15% or lower. The flashing appears after every lock/unlock operation.

Your Tedee Lock needs charging.

Battery

Charging - first 10 seconds

 

▬▬▬▬▬▬▬▬▬▬▬

Constant

 

Battery

Charging - after 10 seconds

 

▬▬▬▬▬▬▬▬▬▬▬

Constant

As above, but brightness falls down to minimum

Delayed

Closing

 

 

 

▬ ▬ ▬

Flashing light

 

LED flashes fast after pressing the button for 1,2 seconds and stops after 5 seconds of button press or while the button is pressed.

Available only if Delayed Closing option is enabled in Tedee App.

Calibration

▬        ▬        ▬        ▬

Flashing

 

LED flashes during the calibration phase.

Error

 

▬▬  ▬  ▬  ▬

Various flashes

Please contact Tedee Support Team.